|
|
Post by BuckSkin on Dec 9, 2017 2:32:26 GMT
I have been using the wonderful DVD printing feature found in the Elements+ tray menu; it is easy to understand and does a fine job.
However, it is set up to leave a rather large "hole" in the picture.
I have purchased some "Hub-Printable" DVDs that allow printing right up to the center-holes edge.
Is there some way to tweak the E+ DVD print feature such that it can take advantage of this extended printable area ?
If not, can someone point me towards something that can?
Thanks for reading.
|
|
|
|
Post by Andrei Doubrovski on Dec 9, 2017 8:45:18 GMT
BuckSkin, Please, try the following: 1) Download the revised version of the script at: elementsplus.net/scripts/Disk-Label.zip 2) Unzip the downloaded file. 3) Put the unzipped "Disk Label.jsx" file to: C:\Elements+\<Your E+ version>\Scripts\Utilities *** The revised script creates the white "hole" as a separate layer (see fig. 1 on the screenshot below). So you can customize, hide or delete it as needed.  For example, to scale the "hole" down transform the layer (as shown on fig. 2). Or delete it completely (fig. 3) Also, you can adjust the image position by moving the "Layer 1" (fig. 4) Hope this helps. |
|
|
|
Post by BuckSkin on Dec 9, 2017 14:05:46 GMT
A HUGE THANK YOU ! ! ! ********** YES, it helps! Deep in my mind, I just knew you would have an improved solution. I have one question that the answer is probably obvious and I am just too dense to see it: The disks I have state the printable area to be 118mm outer diameter, 23.5mm hole diameter; what percentage do I type in the box to yield a 23.5mm center ? Thanks again; as destitute as I am, Elements + just has to be the best twelve bucks I have ever spent ! |
|
|
|
Post by Andrei Doubrovski on Dec 9, 2017 14:26:53 GMT
You are most welcome  As for the scaling, just type "23.5 mm" (i.e., replace "%" with "mm") |
|
|
|
Post by BuckSkin on Dec 9, 2017 15:35:41 GMT
You are most welcome As for the scaling, just type "23.5 mm" (i.e., replace "%" with "mm") It just keeps getting better ! That is just too easy ! Thank you ever-so-much. |
|
